Email firstname.lastname@example.org for orders or questions.
CONTACT OUR OFFICE at 1-208-342-8911
General Gear and Machine, 733 Desert Wind Rd., Boise, Idaho, 83716 US
CORONAVIRUS COVID-19 STATUS
WE ARE STILL OPEN.
WE, AND YOU, HAVE BEEN IN THIS TOGETHER FOR OVER 40 YEARS AND WE WON'T QUIT YOU NOW
KEEP YOURSELF AND FAMILY SAFE. THAT COMES FIRST.
JD550 STEERING CLUTCHES
|The John Deere Model 550's have oil type
steering clutches and use 8 Friction discs p/n T82355 composite paper faced discs on a
steel toothed base along with 8 steel separator plates p/n T31732.
When later JD models were developed they used bimetallic discs to replace the earlier style fiber discs. Some owners prefer the earlier bimetallic friction discs. The bimetallic disc part number is T44129. This was replaced by the paper faced friction discs T82355. Some owners still prefer the Bimetallic discs so it is your choice. The same numbers of discs were used in all circumstances. Most of the time you can get by with only changing the friction discs. The steel separator plates can usually be re-used. Check them for roughness, warping, or dishing and if they are clean, smooth, and straight, by all means re-use them!
All items below are in stock and if you would like to get any of them on the way just let us know! If you are in the US you may call 1-800-531-9021 or if you are outside the US, 1 208 342 8911. You may also email email@example.com for orders/questions.
Our hours are Monday through Friday from 10 am Eastern Time to 6 pm Eastern Time (8 am Mtn Time to 4 pm Mtn Time). We are located 20 miles east of Boise, Idaho.
FOR A WIDER SELECTION OF ALL OF
OUR DISCS MADE
T44129 BIMETALLIC FRICTION DISCS 24.00 EA Will work for dry type or oil type
The T20717 steel separator plates(used in the
earlier JD450's) are often confused with the T31732 plates used in the later steering
clutches of the JD500's. To be sure which plates you have in your clutch the
thickness should be measured. The T20717 will measure closer to .087 while the later
T31732 discs will be closer to .097-.099. If the quantity of your discs varies from
what is normally required, it is usually caused by the mis-use of the wrong steel
BAND...AT142175 ONE PIECE BAND DESIGNED FOR OIL TYPE STEERING CLUTCHES
......$185.00 ea plus UPS/FedEx shipping of $20.00 in the US. These will not ship via
Priority Mail Flat Rate boxes but for rush shipping, Priority Mail of $35.00 in the US.
NO CORE CHARGE!
email firstname.lastname@example.org For orders or questions.
Home | Clutch Discs | Crawler ID Tags | Inventory Index | Inventory Search