Used Caterpillar Parts & Equipment Crawlers

CAT D8 Crawlers

D8 Brass Plates	D8 Painted Plates	D8 .6mm Steel Plates	Set of .6mm Steel Plates	Set of Brass Plates

D8 8R 3558 CATERPILLAR CRAWLER	D8 8R 1943 CRAWLER WITH LE TOURNEAU CABLE CONTROL	D8 8R 3558 RUNNING 1943 D8 CAT	D8 8R 3558 WITH LE TOURNEAU CONTROLS	D8 8R
SOLD	SOLD	SOLD	SOLD
D8H UNDERCARRIAGE	D8H UNDERCARRIAGE	D8H PARALLELOGRAM RIPPER, 2 BBL	D8H 2 BARRELL PARALLELOGRAM RIPPER	CATERPILLAR D8H 36A

D82U 13000 Vintage with Straight Blade	Cat D8 8R Left Side	CAT D8 8R Front Right View	D8H with Angle Blade	D8H with Cat Angle Blade

D82U 8000 Series	D8H 7000 for Parts	CatD8 14A with 2BBL hinge ripper	D8 14A 6800 SERIAL RANGE	D8 14A TRACK PADS

FLEET OF EARLY D8 CRAWLERS OWNED BY SHIPPY BROS	CAT D8 14A	Cat D8 14A Canopy and Ripper	CATERPILLAR D8 15A WITH ATECO RIPPER	D8 46A

CAT D8 1H	Cat D8 1H2	Cat D8H 46A 3800	Cat D8H 46A 3800	CAT D8 8R
				CAT D8H 46A 598 WITH HYDRAULIC HARDNOSE AND CAT HINGE TYPE RIPPER
RAYTRACING BY DAVE MERCHANT	CAT D8 2U 358 ANGLE BLADE AND 25 CCU	D8 1H 8744 1941 YR OF MFGR	D8 2U 358 ANGLE BLADE AND 25 CCU
D8H 46A 598 HINGE TYPE RIPPER	CATERPILLAR D8H 598 FOR PARTS	CAT D8H 46A 532 IN FOR PARTS 03/07	CAT D8H 46A WITH HYDR HARDNOSE AND ATECO HINGE TYPE RIPPER	Cat d8h 46a came in with u blade hydraulic hardnose and tilt. weak engine
Cat D8H 46A w/ hydraulic hardnose, hyd tilt, u blade and cat hinge type ripper	cAT D8H 46A 8480	D8H 46A HINGE TYPE RIPPER	CAT D8H 46A W/ HYDRAULIC HARDNOSE, HYD TILT, AND U BLADE	CAT D8H 46A 5686 WITH VERY NICE TRACK BY ITM TRACKS SOLD
cat d8h 36a hyster d8d winch	CAT D8H 36A HYDRAULIC HARDNOSE SEMI-U BLADE W/ TILT COMPLETE RUNNING UNIT	D8H 36A RUNNING DOZER SEMI U BLADE WITH WINCH HYDRAULIC HARDNOSE WE PULLED BAD STARTING ENGINE AND ADDED 24V. STARTING		D8 MAGNETO FITS EARLY MODELS OF D8 CRAWLERS MODELS 1H, 8R, 2U, 13A REPLACES PART NUMBERS: 6B2756, 3F8574, 5F7494, 7F9934 9H4474, 4S6486, 9Y4331 FOR D13000 ENGINES

Contact John Parks at 1-208-342-8911
General Gear and Machine, 733 Desert Wind Rd., Boise, Idaho, 83716 US

CAT D2 Crawlers

D2 Brass Plates	D2 Painted Plates	D2 .6mm Steel Plates	Set of .6mm Steel Plates	Set of Brass Plates
			www.steeringclutch.com	D2 MAGNETO FITS ALL MODELS OF D2 CRAWLERS, 933 11A TRACK LOADER, AND MODEL 212 MOTORGRADER FOR D3400 AND D311 ENGINES WITH STARTING ENGINES MOUNTED ON TOP OF FLYWHEEL HOUSINGS
D2 5J6293 LAPLANT-CHOATE R2 ANGLE BLADE CAT FRONT HYDR UNIT W-REAR QUICK CPLRS	D2 5J6293 W-CAT HYDS AND REAR QUICK CPLRS	D2 5J6293 DIVERTER VALVE FOR REAR COUPLERS

CAT D2 Front Hydr for Parts	Cat D2 rear PTO	Cat D2 rear PTO w coupling	Cat D2 wide gauge angle blade	Cat D2 wide gauge angle blade moldboard

CAT D2 5J	CAT D2 5J3650	CAT D2 5U WITH REAR 41 HYDRAULIC UNIT	CAT D2 5U WITH CAT REAR HYDRAULICS	CAT D2 5U18000, RECLAIMED FROM CREEK WHERE PREVIOUS OWNER LEFT IT WHEN IT OVERHEATED (CRACKED HEAD)

CAT #22 CRAWLER	CAT 22 LOGGING CAT, RUNS IN CIRCLES (BAD FINAL DRIVE)	CAT 15 REAR VIEW	CAT #22 CRAWLER	CAT 15 PV

CAT 15 FRONT W MM RADIATOR	CAT 15 HOMEMADE ANGLE BLADE	CAT 15 LH VIEW	CAT 15 PV MODEL	D2 4U 4000 VINTAGE NARROW GAUGE CRAWLER
REAR PTO FOR CAT MODEL 22 1A1669 BELT PULLEY DRIVE GROUP	REAR PTO FOR CAT 22 BELT PULLEY DRIVE GROUP 1A1669	DRUM TYPE REAR PTO	CAT D2 3J 3805 1939 MODEL	D2 4U 4000 NARROW GAUGE CRAWLER
D2 CRAWLER DOZER POOR ENGINE INTO YARD 3/29/08	1944 D2 5J6254 HYDRECO REAR PUMP STRAIGHT BLADE	CAT D2 DOZER HAVE SEEN THIS SAME BLADE MOUNTED ON ALLIS CHALMERS MODEL M

CAT D4 Crawlers

D4 Brass Plates	D4 Painted Plates	D4 .6mm Steel Plates	Set of .6mm Steel Plates	Set of Brass Plates

Cat D4 4G partially restored	9V MODEL 41 HYDRAULIC UNIT ON CAT D4	Cat D4 7J with bad engine	SHOP BUILT BLADE ON CAT D4 2T	CAT D4 2T

CAT 30/R4 6G SERIES, FROZEN ENGINE BUT WITH ONLY 1800 HOURS ON METER	CLOSEUP OF CAT 6G UNDERCARRIAGE	FRONT HYDRAULIC UNIT OF CAT 30/R4 6G	CAT R4 SERIAL #6G	D4 5T NARROW GAUGE CRAWLER DOZER

CAT 933 42A6000 TRACK LOADER	CAT 933 42A6000 TRAXCAVATOR	D4 5T WITH LaPlant-Choate 4R ANGLE BLADE	933 42A TRACK LOADER	933 42A TRACKLOADER
D4 7U36057 CAT HYDRAULICS	D4 7U AND HYDR ANGLE BLADE	CAT D4 7U 1710 CRAWLER DOZER	D4 7U TRACKS AND SPROCKET	933 42A TRACK LOADER WITH 4-IN-ONE BUCKET
D4 7U WITH REAR PTO	D4 7U36057 WITH GOOD ENGINE JUST IN 12/06 ENGINE SOLD	www.steeringclutch.com	CAT D4 ANGLE BLADE ON D4 7U WIDE GAUGE
into yard 12/07 PINS-BUSHINGS WORN, GOOD PADS EARLY HYSTER D4 WINCH	D4 7U RUNS BUT SLOBBERS AT LOW RPM, DIRECT ELECT START, LATE CYL HEAD W/ GLOW PLUGS	FRONT CAT HYDRAULICS D4 7U 33733	955 12A RACK LOADER CAME IN IN MIDDLE OF ENGINE REPAIR (D315 ENGINE HAS STD CRANK AND SERVICED HEAD READY TO INSTALL)	GOOD TRACK (SAME AS ON THE D4 CRAWLER DOZERS BUT WITH STREETPADS) D315 ENGINE, SAME AS USED ON THE D4 6U/7U
CATERPILLAR D4 2T CRAWLER DOZER GOOD RUNNING DIESEL ENGINE S.E. SEIZED	D4 2T 225W GOOD TRACKS, FULL TINWARE ON TRACK FRAMES ARRIVED 05/10
D4 MAGNETOS FITS ALL MODELS OF D4400 AND D315 ENGINES D4 MODELS 4G, 7J, 2T, 5T, 6U, 7U 955 12A TRACKLOADERS MODEL 112 GRADERS WITH STARTING ENGINES MOUNTED ON TOP OF FLYWHEEL HOUSINGS		CAT D4 4G 5700 W WIDE GAUGE D4 CRAWLER DOZER HOLT ANGLE BLADE WILL FIT D4 7U OR TD9 WIDE GAUGE	CAT D4 4G CRAWLER EARLY MODEL MFG'D 1937 ARRIVED 07/10 NICE TRACKS COMPLETE RUNNING MACHINE	CAT D4 4G NICE RUNNING ENGINE (SEE 2nd D4 VIDEO BELOW) (WORKING ON IT NOW!!!) LH STEERING CLUTCH STUCK

CAT D6 & Similar Crawlers

D6 Brass Plates	D6 Painted Plates	D6 .6mm Steel Plates	Set of .6mm Steel Plates	Set of Brass Plates

CAT D6 4R WIDE GAUGE CRAWLER	CAT D6 4R CRAWLER	Cat D6 8U 10229 AND ANGLE BLADE	Cat D6 8U w wet clutch and narrow ga	D6 9U AND CAT #11

CAT D6 9U	#25 CABLE CONTROL ON D6 9U	NO 6 TRAXCAVATOR 10A LH SIDE	NO 6 TRAXCAVATOR MODEL 10A BUCKET	NO 6 TRAXCAVATOR MODEL 10A

CAT D6 9U ANGLE BLADE	D6 9U D318 ENGINE FOR DRY CLUTCH	CAT D6 9U WITH 25 CABLE CONTROL	CAT 955 60A CRAWLER LOADER	CAT 955 60A TRAXCAVATOR

CAT D6 9U1305	CAT D6 9U 17000 and HYSTER D6N WINCH	CAT D6 9U 1305 CRAWLER DOZER	CAT D6 9U 1179 BULLDOZER	CAT D6 9U17000

CAT D6 9U1179 DOZER AND FRONT CCU	CAT D6 9U ANGLE BLADE	CAT D6 2H ENGINE AND S.E. 3 CYL DIESEL	CAT D6 2H 3 CYL DIESEL	cAT D6 9U 33000 WITH STRAIGHT BLADE
CAT D6 5R 2982 ARRIVED 02/10 BOTH ENGINES ROTATE TO BE CHECKED FURTHER IT'S ALIVE!! SEE VIDEO BELOW	CAT D6 5R 2982 BLADE APPEARS TO BE BY LE TOURNEAU IT'S ALIVE!! SEE VIDEO BELOW	D6 5R 2982 REAR MOUNT HYDRAULICS IT'S ALIVE!! SEE VIDEO BELOW	CAT D6 5R 2982 RIGHT HAND VIEW SHOWING HARDNOSE, PUMP, CONTROLS IT'S ALIVE!! SEE VIDEO BELOW	CAT D6 5R 2982 LEFT HAND VIEW IT'S ALIVE!! SEE VIDEO BELOW

CAT D7 Crawlers

D7 Brass Plates	D7 Painted Plates	D7 .6mm Steel Plates	Set of .6mm Steel Plates	Set of Brass Plates
		D7 MAGNETO FITS EARLY MODELS OF D7 CRAWLERS MODELS 7M, 3T, 4T, 6T, REPLACES PART NUMBERS: 6B2756, 3F8574, 5F7494, 7F9934 9H4474, 4S6486, 9Y4331
D7 3T 27561 W- 25 CCU AND ANGLE BLADE	D7 3T 27561 COMPLETE RUNNER

D73T RIGHT REAR VIEW	Segmented Sprockets For D7 3T and D7 17A	D7 3T CRAWLER RIGHT FRONT	D4 7J, EQUIPPED WITH LE TOURNEAU REAR CABLE UNIT	D7 3T PARTS MACHINE

D7 3T 23000 WITH HOMEMADE CANOPY	D7 9G6 SHOWING LE TOURNEAU BLADE GROUP	D7 9G #6, WITH LE TOURNEAU CABLE CONTROL AND BLADE	CAT D7 9G #6	CATERPILLAR D79G #6

D7 3T EQUIPPED W/ FRONT 24 CCU AND REAR HYSTER WINCH	OUR D7 17A YARD MACHINE, BEFORE WE CHANGED CANOPY	D7 17A, CAME IN WITH BAD FINALS AND BROKEN TRACK FRAME	REAR VIEW, D7 17A WITH HYSTER D7D WINCH	CAT D7 3T, DANGERS OF AUCTION PURCHASE, RAN 3 HOURS BEFORE CONN ROD ESCAPED FROM BLOCK

JK'S (SON) D7 7M, HIS FIRST CRAWLER PURCHASE, AN OLD, RUNNING, LANDFILL CAT WHICH PULLED A LE TOURNEAU SCRAPER	FRONT VIEW, D7 7M	CAT D7 3T 700 VINTAGE	D7 4T OWNED BY HALTON TRACTOR	NEVER LOAN YOUR D7 TO A CARELESS NEIGHBOR

The start of a D7 17A project that lead to the overhaul of	steering clutches, final drives, track frames, complete undercarriage, and more	Clay and Morgan are done	Morgan takes over in time for the first run	D7 17A YARD MACHINE

SEGMENTED SPROCKETS AND SEGMENTS FOR D7 3T/4T/6T AND 17A'S ONE SPOKE TYPE AND ONE DISC TYPE SOLD	CAT D7 17A WITH HYD HARDNOSE AND TURBOED ENGINE	cat d7 17a in for parts	CAT D7 17A W/ HYDRAULIC HARDNOSE AND ANGLE BLADE	CAT D7 17A WITH 25 REAR CCU, CAT ANGLE BLADE, FRONT HYDRAULICS FOR ANGLE TILT ON BLADE
CAT D7 17A ENGINE LEFT OPEN AND STUCK INTO YARD 4/08	CAT D7 17A ANGLE BLADE NON RUNNER	CAT D7 17A C FRAME FOR ANGLE BLADE MOLDBOARD IN EXCELLENT SHAPE	CAT D7 3T WITH EQUIPPED WITH STRAIGHT BLADE SUPPOSED TO RUN	CAT D7 3T 13313 REAR CABLE UNIT REMOVED
CAT D7 17A ANGLE BLADE AND REAR 25 CABLE CONTROL	CAT D7 17A RUNNING UNIT POOR UNDERCARRIAGE	D7 17A 873 JUST IN 04/08		D7 MAGNETO FITS EARLY MODELS OF D7 CRAWLERS MODELS 7M, 3T, 4T, 6T, REPLACES PART NUMBERS: 6B2756, 3F8574, 5F7494, 7F9934 9H4474, 4S6486, 9Y4331

CAT D9 Crawlers

Crawler Brass Plates	Crawler .6mm Steel Plates	Crawler .6mm Steel Plates	Set of .6mm Steel Plates	Set of Brass Plates

Cat D9G 34A S Blade	Cat D9G 34A