Email    steeringclutch@gmail.com      for orders or questions.

 
CONTACT OUR OFFICE at 1-208-342-8911

General Gear and Machine
733 Desert Wind Rd.,
Boise, Idaho, 83716  US


 

JD350C and 355 LOADER STEERING CLUTCHES

The John Deere Model 350C's below serial # 752882 originally used 8 FRICTION DISCS  T43436 and 8 STEEL SEPARATOR PLATES p/n T21315. When later 350C'S , Ser# 752883 and up, the steering clutches used 6 PAPER FACED FRICTION DISCS per clutch P/N T120864  to replace the earlier style Bimetallic discs.   Quantity 9 STEEL SEPARATOR PLATES, P/N T120865 were used in each steering clutch.   Both the late style friction discs and steel separator plates were thicker than previously used. Most of the time you can get by with only changing the friction discs. The steel separator plates can usually be re-used. Check them for roughness, warping, or dishing and if they are clean, smooth, and straight, by all means re-use them!  When upgrading to the newer design and mixture of discs, JD recommends doing both sides but I am at a loss as to why changing both sides is necessary.  If someone can enlighten me I'd WELCOME THE EXPLANATION!  If it is simply a downtime precaution, based on the theory that one clutch will wear at the same rate as the other and doing both would perhaps save having to get into the machine a short time later, that may be wise.

Occasionally we get calls regarding "complete" steering clutch kits. The term, "Complete Kit", is misleading because it implies that the parts supplier knows what you need for your clutch. They don't!! (And...not all"Kits" being offered by different parts suppliers are even the same!!)

We take the menu approach. This gives you, the equipment owner or repair shop, the right to select only the items that you need to make your repairs. You're the boss!

                   uspsfreeshippingicon.jpg (27000 bytes)  Free shipping in US only, Priority Mail or UPS Ground, on orders $500 or higher.

ORDERING INFO: 
GRIMY_Man_SM.jpg (55040 bytes)  We can usually ship on the same day any items we have in stock that do not have to be pulled from a machine.  We are set up to offer the payment choices of either Visa, Master Card, or the PayPal option (to the account of webmaster@tractorparts.com)

All items below are in stock and if you would like to get any of them on the way just let us know!  If you are in the US you may call  1-800-531-9021 or if you are outside the US, 1 208 342 8911.  You may also email steeringclutch@gmail.com  for orders/questions.

Our hours are Monday through Friday from 10 am Eastern Time to 6 pm Eastern Time (8 am Mtn Time to 4 pm Mtn Time).  We are located 20 miles east of Boise, Idaho.

 

FOR A WIDER SELECTION OF ALL OF OUR DISCS MADE
FOR MANY OF THE JOHN DEERE MACHINES....
CLICK HERE


FOR ONE COMPLETE PACK OF CLUTCH DISCS
6 FRICTIONS AND 9 STEEL SEPARATOR PLATES = $294.00


JD_350C_T120864_FRICTION_DISC.JPG (190245 bytes)  
T120864  FRICTION DISCS (6 USED PER CLUTCH)   NEW...... $22.00 ea


JD_350C_T120865_STEEL_SEPARATOR_PLATE.JPG (210880 bytes)
T120865 STEEL separator plates, (9 USED PER CLUTCH)  NEW........
$18.00 EA.

  JD_T15801_DISC_BIMETALLIC_76_EXT_TEETH_6.46IN_OD.JPG (406132 bytes)  T15801 POWER REVERSER CLUTCH DISC, SINTERED BIMETALLIC,  76T  4.64 OD     T15801   $15.00 EA

JD_T20789_SNAP_RING_STRG_CLUTCH.jpg (191857 bytes)      NEW........ T20789 SNAP RING .............. IN STOCK  $12.50 EA OR PAIR FOR $20.00

 IDENTIFYING YOUR JD350-350B-350C   You will find different serial number locations on different models of the JD350 series of crawlers.  Below are some files showing you where to look for your serial number and what they mean when you find them.
                 JD350
                  JD350B
                  JD350C



Click HERE to view all of our new steering clutch discs.
 

email steeringclutch@gmail.com      for orders or questions.

 
CONTACT OUR OFFICE at 1-208-342-8911

General Gear and Machine, 733 Desert Wind Rd.,
Boise, Idaho, 83716  US
*All prices are in USD & do not include shipping
All prices are for new aftermarket unless stated otherwise
All OEM part numbers are for references only