Email firstname.lastname@example.org for orders or questions.
CONTACT OUR OFFICE at 1-208-342-8911
General Gear and Machine, 733 Desert Wind Rd., Boise, Idaho, 83716 US
CORONAVIRUS COVID-19 STATUS
WE ARE STILL OPEN.
WE, AND YOU, HAVE BEEN IN THIS TOGETHER FOR OVER 40 YEARS AND WE WON'T QUIT YOU NOW
KEEP YOURSELF AND FAMILY SAFE. THAT COMES FIRST.
KOMATSU D30 D30A D31 D31A
|We have had both dry clutch discs and oil type
clutch discs produced, both friction discs and steel separator plates, for the D30 D31
D30A AND D31A D31Psteering clutches.
Quantities required are based upon your model, serial number, and the condition of your clutch.
Check your clutches closely. You can often get by with only replacing the friction discs. Use your best judgment for evaluating your steel plates. You do not want to install plates that are rough and will accelerate the wear on your new fiber discs. Clean them with wire brushes, sandblasting, or whatever it takes to get them as smooth as possible and then make your decision. It is up to you of course, but unless you just like to pull wrenches, these steering clutches are not that much fun to have to remove and reinstall because you tried to save a hundred dollar bill.
In US only, via Priority Mail, 2-3 day delivery, on orders $500 or higher.
All items below are in stock and if you would like to get any of them on the way just let us know! If you are in the US you may call 1-800-531-9021 or if you are outside the US, 1 208 342 8911. You may also email email@example.com for orders/questions.
Our hours are Monday through Friday from 10 am Eastern Time to 6 pm Eastern Time (8 am Mtn Time to 4 pm Mtn Time). We are located 20 miles east of Boise, Idaho.
email firstname.lastname@example.org for orders or questions.