Email firstname.lastname@example.org for orders or questions.
CONTACT OUR OFFICE at 1-208-342-8911
General Gear and Machine
733 Desert Wind Rd., Boise, Idaho, 83716 US
KOMATSU D37E-5 Oil Type Clutches
|For the Komatsu we have had both dry clutch
discs and oil type clutch discs produced, both friction discs and steel separator plates,
and for the D37E-5 and others we have the oil type clutch discs for your steering
Quantities required are 9 steel separator plates and 8 friction plates.
Check your clutches closely. You can often get by with only replacing the friction discs. Use your best judgment for evaluating your steel plates. You do not want to install plates that are rough and will accelerate the wear on your new friction discs. Clean them with wire brushes, sandblasting, or whatever it takes to get them as smooth as possible and then make your decision. It is up to you of course, but unless you just like to pull wrenches, these steering clutches are not that much fun to have to remove and reinstall because you tried to save a hundred dollar bill.In US only, via Priority Mail or UPS on orders $500 or higher.
Our hours are Monday through Friday from 10 am Eastern Time to 6 pm Eastern Time (8 am Mtn Time to 4 pm Mtn Time). We are located 20 miles east of Boise, Idaho.
DISCS FOR THE D37E-5 ARE THE SAME AS USED ON THE LATE STYLE OIL CLUTCHES IN THE D30 AND D31 MODELS.
email email@example.com for orders or questions.